Jeffers Puppy Pen Replacement Parts

Jeffers Puppy Pen's Replacement Parts.

Gives your puppy a place to call home!

Whether transporting puppies, protecting them at shows, or even protecting your furniture from their sharp little teeth, puppy pens solve many needs.

• hygienic floors
• folds flat for easy transportation and storage
• top and side doors for easy access
• pans slide out for easy cleaning

Setup Instructions

Step 1: Unfold
Stand pen on floor with handles up. Open the pen by pulling the left side then the right side out. Pull the sections of the panels which are inverted to form a complete square.

Step 2: Insert Pan(s)
Insert the pan(s) underneath the front door panel. Pan(s) lock into place between the four legs

Step 3: Install Floors
Hold one of the black floor panels so that the four end prongs are toward you and facing down. Standing in front of the front door panel, lower floor panel straight up and down into the pen with the two side prongs at the center of the hinged sides. The two side prongs lock at the desired height. The four-prong side is lowered and the prongs will hook and lock over outside edges on the front door panel. (The floors can be placed at any level, giving you five different height options.)* Lower the second floor in the same manner.

Step 4: Latch Top
The top panel (attached to the panel without a door) is closed by bringing it upwards and placing the side prongs underneath the top side wire and then latching the side hooks over the top side wire. The other top panel swings up and is locked by squeezing both top panels together causing the hooks on the front top to latch over the rear top wire.

*18" & 24" wide Puppy Pens have one-piece floor. 48" floors have interlocking tabs for extra support.